Cutting disc Klingspor A 46 N Supra
Cutting disc for aluminium A 46 N Supra Klingspor
CUTDSC-KLINGSPOR-170707-2,5X22,23-D115
Register now and access more than 125,000 products
The Kronenflex cutting disc A 46 N Supra is the ideal accessory for both professional and DIY users of angle grinders and for the machining of aluminium. The high-quality product uses a special formula to prevent soiling and clogging during cutting. This results in optimal cutting performance for aluminium and other non-ferrous metals. The product is characterised by high aggressiveness and a long service life, while also offering good hardness.
Klingspor offers this cutting disc in a range of diameters and in a straight or offset design.
Datasheets(X)
Diameter | 115 mm |
Thickness | 2.5 mm |
Drill hole | 22.23 mm |
Design | Cranked |
Max. rotation speed | 13300 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Microfbre cloth, professional
90° elbow, reduced with female thread EN10242 A1, hot-dip galvanised malleable iron
Cut protection glove
Safety boots, S3
Screwdriver PH 3C handle with hexagon shank
EPS profile thumbturn cylinder
Work dungarees
Hexagonal bolt with flange
Low-cut safety shoes, S1
plastic sealing ring Natural, similar to DIN 7603