Cutting disc Klingspor A 630 N Supra
Cutting disc for steel A 630 N Supra Klingspor
CUTDSC-KLINGSPOR-353324-2,5X25,4MM-D356
Register now and access more than 125,000 products
The Kronenflex large cutting disc A 630 N Supra will help any tradesperson achieve professional results. The abrasive meets the most stringent requirements and is primarily used for materials such as steel, stainless steel, aluminium
and cast iron. This is where the product achieves its best performance.
This cutting disc is useful for the machining of metal - especially for maintenance and repair work, for metal construction and for use in fitter's shops.
- Aggressive design with a good service life
- Particularly well suited to cutting solid material
- Low thermal load
- Low ridge formation
Datasheets(X)
Diameter | 356 mm |
Thickness | 2.5 mm |
Drill hole | 25.4 mm |
Design | Straight |
Max. rotation speed | 4400 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Fishplate bolt
Spacer stud, polyamide, hex, F/M
VARIFIX® c-assembly rail 36/36
Cutlery insert
Hexagonal bolt with shank ISO 4014, steel 8.8, zinc-nickel-plated, silver (ZNSHL)
Charger For WLH 1.4 cordless LED hand-held lamp
ECOFAST® chipboard screw Steel, zinc-plated yellow, partial thread, countersunk milling head, PZ drive
Washer ISO 7091 steel 100 HV zinc-plated, blue passivated (A2K)
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Threaded pipe fittings