Cutting disc, carbide-tipped
Cutting disc carbide-tipped
CUTDISC-TC-1,8-DR10,0-D76MM
Register now and access more than 125,000 products
Time-saving
Different materials can be cut with a single device. No more time-consuming machine and accessory changes.
Quick, clean cuts
- Thanks to special disc design.
- The minimum disc thickness and the presence of damping slits facilitates a high circumferential speed of 80 m/s.
Extremely safe to use
The robust connection between the steel body and carbide granulate ensures durability and safety when cutting (no kick-back effect, e.g. if nails are cut).
Flexible to use and easy to operate
Either rotation direction can be selected.
Datasheets(X)
Hard/softwood, wood with nails, plywood, chipboard, MDF, gypsum plasterboard and fibreboard panels, plastic (cable ducts, pipes or similar) etc. For construction and renovation work, in particular for electricians, plumbers, joiners.
Diameter | 76 mm |
Thickness | 1.8 mm |
Drill hole | 10 mm |
Max. rotation speed | 20100 rpm |
Last viewed
Hexagonal bolt with thread up to the head
Paint spray, silk gloss
KALTSCHMELZ® device KSG-E Caravan For adhesive-free insertion of variably positionable plastic anchors into frameless lightweight panels
Self-adhesive protective film SK 50
Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, plain
Raised countersunk head screw with recessed head, H ISO 7047, steel 4.8, zinc-plated, blue passivated (A2K)
Safety boots, S3
Locking disc spring washer, shape Z Spring steel hardened 420-510 HV10, zinc-flake coated
Eyelet screw GS
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, steel 8.8, zinc-plated yellow