Cylinder head screw with hexalobular socket ISO 14579, titanium Grade 5
ISO 14579 titanium Grade 5
SCR-CYL-AEISO14579-TIAL4V-TX10-M4X10
Register now and access more than 125,000 products
Increased assembly productivity
When using hexalobular-drive (TX) fasteners, the power is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because power is distributed optimally
- No damage to surface coating
- No wobbling
- Screw locates securely
Hexalobular drives must comply with DIN EN ISO 10664
- As a result, fasteners with hexalobular sockets are standardised and can be used all over the world
 | |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 10 mm |
Head diameter (dk) | 7.0 mm |
Head height (k1) | 4.0 mm |
Standards | ISO 14579 |
Material | Ti6AlV4 |
Surface | Plain |
Head type | Socket head |
Drive type | Internal hexalobular |
Internal drive | TX10 |
Thread type | Metric thread |
Pitch | 0.7 mm |
Thread design | Full thread |
Shank diameter | 4 mm |
Thread length (metric thread) | 20 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Speeddrill+ Universal solid carbide twist drill bit DIN 6537K, short 3xD, 2 drill heels
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
Flat washer without chamfer ISO 7089 A2 stainless steel, 200 HV
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Work trousers
Eye bolt with full thread DIN 444, steel 4.6, plain, shape LB
FPM/ECO/AR/ECO petrol hose with low permeation for fuel-carrying applications
1/2 inch torque wrench With push-through square drive and fine toothed ratchet head (72 teeth)
VARIFIX® retaining clips zinc-plated
