Cylinder head screw with hexalobular socket ISO 14579, titanium Grade 5
ISO 14579 titanium Grade 5
SCR-CYL-ISO14579-TI6AL4V-TX10-M3X10
Register now and access more than 125,000 products
Increased assembly productivity
When using hexalobular-drive (TX) fasteners, the power is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because power is distributed optimally
- No damage to surface coating
- No wobbling
- Screw locates securely
Hexalobular drives must comply with DIN EN ISO 10664
- As a result, fasteners with hexalobular sockets are standardised and can be used all over the world
Datasheets(X)
 | |
Length (l1) | 10 mm |
Head diameter (dk) | 5.5 mm |
Head height (k1) | 3 mm |
Standards | ISO 14579 |
Material | Ti6AlV4 |
Surface | Plain |
Head type | Socket head |
Drive type | Internal hexalobular |
Internal drive | TX10 |
Pitch | 0.5 mm |
Thread design | Full thread |
Last viewed
Wire cable terminal With fork
Base height adjuster, type L
Central lubricating system filler hose With central lubricating system universal connection
WÜPOFAST® zinc-plated blue chipboard screw
Threaded rod
Shim ring DIN 988, steel, plain
Hexagon nut, low profile, with clamping piece (non-metal insert)
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Double cylinder S5 locking system
Cleaning brush For masonry with M6 connecting thread