Cylinder head screw with hexalobular socket ISO 14579, titanium Grade 5
ISO 14579 titanium Grade 5
SCR-CYL-ISO14579-TI6AL4V-TX10-M3X8
Register now and access more than 125,000 products
Increased assembly productivity
When using hexalobular-drive (TX) fasteners, the power is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because power is distributed optimally
- No damage to surface coating
- No wobbling
- Screw locates securely
Hexalobular drives must comply with DIN EN ISO 10664
- As a result, fasteners with hexalobular sockets are standardised and can be used all over the world
Datasheets(X)
 | |
Length (l1) | 8 mm |
Head diameter (dk) | 5.5 mm |
Head height (k1) | 3 mm |
Standards | ISO 14579 |
Material | Ti6AlV4 |
Surface | Plain |
Head type | Socket head |
Drive type | Internal hexalobular |
Internal drive | TX10 |
Pitch | 0.5 mm |
Thread design | Full thread |
Last viewed
Blind rivet, open, with break mandrel and flat head ISO 15983, dome head, A2/A2 stainless steel
Safety shoe S3
Hexagon Socket Head Cap Screw ISO 4762, steel, strength class 8.8, zinc-nickel-plated, black (ZNBHL)
ISO insert holder with S clamping system for CC indexable inserts
C 6.3 TX bit (1/4 inch)
Hexagonal bolt
Slotted cylinder head screw ISO 1207, polyamide 6.6, natural
One kids’ softshell jacket
Low-cut safety shoes, S1P
WÜPLAST® pan head screw with flange and hexagon socket WN1451, A2 stainless steel