Cylinder head screw with hexalobular socket ISO 14579, titanium Grade 5
ISO 14579 titanium Grade 5
SCR-CYL-ISO14579-TI6AL4V-TX10-M5X16
Register now and access more than 125,000 products
Increased assembly productivity
When using hexalobular-drive (TX) fasteners, the power is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because power is distributed optimally
- No damage to surface coating
- No wobbling
- Screw locates securely
Hexalobular drives must comply with DIN EN ISO 10664
- As a result, fasteners with hexalobular sockets are standardised and can be used all over the world
Datasheets(X)
 | |
Length (l1) | 16 mm |
Head diameter (dk) | 8.5 mm |
Head height (k1) | 5.0 mm |
Standards | ISO 14579 |
Material | Ti6AlV4 |
Surface | Plain |
Head type | Socket head |
Drive type | Internal hexalobular |
Internal drive | TX25 |
Pitch | 0.8 mm |
Thread design | Full thread |
Last viewed
Twist drill bit, metal Ruko DIN 338 TL 3000 HSS-G plain 130°
SNAP marker
Drill BM 10-E COMPACT
ASSY® 4 A2 RCS fittings screw A2 stainless steel plain full thread raised countersunk head
Identification rings, PVC
Low-cut safety shoes, S1P
Women's polo shirt Hakro 110
W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
ISO insert holder with S clamping system for CC indexable inserts
Threaded piece, inch