Cylinder tapping screw, C shape with hexagon socket
SCR-CYL-WN4762-C-HS5-A4/20H-5,5X19
Art.-no. 012705519
EAN 4052703026647
Register now and access more than 125,000 products
- Tapping screws are thread-forming screws. These screws form their own counter thread when screwed into a prefabricated core hole
- Reference values for selecting the correct core-hole diameter are included in DIN 7975
Stainless steel tapping screws are softer than case-hardening steel tapping screws. These screws are therefore not able to form a counter thread in steel sheets. For this reason, they are used only in soft materials such as aluminium.
Datasheets(X)
 | |
Material | Stainless steel A4 |
Surface | Plain |
Form | C |
Nominal diameter (d1) | 5.5 mm |
Length (l1) | 19 mm |
Head diameter (dk) | 10 mm |
Head height (k1) | 6 mm |
Internal drive | HS5 |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Head type | Socket head |
Declaration of performance (EU-CPR) | No |
Shape of tip | C |
| Thread size | St 2.2 | St 2.9 | St 3.5 | St 3.9 | St 4.2 | St 4.8 | St 5.5 | St 6.3 | St 8 | St 9.5 |
| Min. sheet thickness (mm) | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | 2,1 |
| Max. sheet thickness (mm) | 1,8 | 2,2 | 2,8 | 3 | 3,5 | 4 | 4,5 | 5 | 6,5 | 7,5 |
| Pre-drilling diameter (mm) | 1,2 | 2,1 | 2,6 | 2,8 | 3,0 | 3,5 | 4,1 | 4,7 | 6,1 | 7,7 |
Last viewed
Universal protector W.TEC® WP 600 cover cap
Fixanchor internal thread W-FAZ-IG/S - push-through installation
Application nozzle extension
Flat divider set for workshop trolleys with system dimensions 12.8
WÜRTH MODYF New Air S1P safety shoe
Adhesive film for steering wheel protection
Roll-off unit, 2x for vehicle protective films
E-mobility workshop trolley BASIC 8.8, barrier post holder
Mechanic's gloves Mapa Ultrane 541
Hand sanding pad Schleiffix