Cylindrical pin, hardened DIN 6325, steel, plain
DIN 6325 steel hardened plain
PIN-CYL-DIN6325-HDND-M6-5X100
Register now and access more than 125,000 products
DIN 6325 has been retracted and replaced by DIN EN ISO 8734 (changes to domed shape and heights, nominal lengths changed in parts).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 5 mm |
Length (l1) | 100 mm |
Standards | DIN 6325 |
Material | Steel |
Surface | Plain |
Design | Hardened |
Rockwell hardness, HRC | 60 HRC |
Tolerance class | m6 |
RoHS-compliant | Yes |
Last viewed
Lower ladder section For aluminium extension ladders
EPS profile double cylinder
Plaster dispenser
EPS profile double cylinder
FLEXEN® cold rubber Plus S2 continuous coil pipe insulation
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
ASSY® 4 CS fittings screw Steel zinc plated full thread countersunk head
Concrete screw with pan head W-BS/S
Washer ISO 7090 steel 200 HV plain
HSCo8 end mill, short, centre-cutting DIN 844K