Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
DIN 7 m6 plain steel
PIN-CYL-DIN7-UNHDND-M6-16X140
Register now and access more than 125,000 products
DIN 7 was withdrawn and superseded by DIN EN ISO 2338 (changes made to length definition and dome heights).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 16 mm |
Length (l1) | 140 mm |
Height of flat point (c) | 2.5 mm |
Standards | DIN 7 |
Material | Steel |
Surface | Plain |
Design | Unhardened |
Tolerance class | m6 |
RoHS-compliant | Yes |
Last viewed
Hexagonal bolt with flange in accordance with MBN standard
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
Spade drill bit For wood
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
Work dungarees
Knurled nuts, low type DIN 467, brass, nickel-plated
Feather key, high shape DIN 6885, steel, plain, shape B
FLEXEN® pipe insulation S2 2 m section
Hexagonal bolt with shank