Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
DIN 7979 steel hardened plain
PIN-CYL-DIN7979-HDND-D-M6-20X120
Register now and access more than 125,000 products
DIN 7979 was withdrawn and superseded by DIN EN ISO 8735. (Some other nominal lengths changed)
Datasheets(X)
CAD data (available after login)
Cylindrical pins with internal threads are mainly used in blind holes.
 | |
Nominal diameter (d1) | 20 mm |
Length (l1) | 120 mm |
Connection thread (d2) | M10 |
Thread length (metric thread) (t1) | 16 mm |
Hole depth (t2) | 25 mm |
Standards | DIN 7979 |
Material | Steel |
Surface | Plain |
Design | Hardened |
Rockwell hardness, HRC | 60 HRC |
Tolerance class | m6 |
Form | D |
RoHS-compliant | Yes |
Last viewed
FLEXEN® cold rubber Plus S2 continuous coil pipe insulation
1/2" socket wrench insert Inch, short
HSCo Multi Longlife machine tap for through holes DIN 371/376
Engine oil Endurance IV 0W-20
Twist drill bit HSS DIN 338 type RN 130°
Distributor cabinet W-VEV 100/060-6/V3/X
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Handle
Ducting clamp Part 1 – Light series
Tungsten carbide bur with STEEL teeth