D30 PP sealing collar for single anchor points
Sealing collar D30 PP single anchor point
SEALCOLAR-F.ANCPT-D30-WP-PP
Register now and access more than 125,000 products
- Bezel for sealing single anchor points, pipes, cables and lines
- Against water ingress on PP roofing membranes
- Suitable for a wide range of roofing membranes (e.g. Alkor, Bauder, Flag, Sika, Sucoflex, Vedag, Mapei)
- Observe the installation instructions and technical regulations for sealing (flat roof directive of the German central association for the roofing trade)
- The free end must be sealed against penetration with heat-shrink tubing to prevent water from entering
- PP heat-shrink tubing 55/16 with a length of 10 cm is included in the scope of delivery
Datasheets(X)
Against water ingress on exposed flat roofs.
Product weight (per item) | 0.148 kg |
Material | PP - Polypropylene |
Diameter | 175 mm |
Diameter of hole | 30 mm |
Diameter of hole 2 | 36 mm |
Last viewed
HSS Performance die For standard metric ISO thread
Hexagonal bolt with thread up to the head
671 SLS table frame
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
Hexagonal bolt with shank
Feather key, high shape DIN 6885, steel, plain, shape B
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Jacket
Single wire seal (SEAL) For uninsulated cable connector
Countersunk tapping screw type C with H recessed head ISO 7050, shape C, zinc-plated, blue passivated (A2K), with H cross recess