DIN regulating angle valve, 1/2", printed
DIN regulating angle valve 1/2 inch printed
CRNVLVEP-RINT-DN15-1/2IN
Register now and access more than 125,000 products
- DVGW-tested in accordance with DIN 3227
- Noise class I, test mark P-IX 723/IA
- Screw fitting with length compensation
- Long shaft with sliding rosette
- Made in Germany
We can print all of our high-quality regulating valves with your template. Simply order using the separate article number and we will contact you about the print template.
Minimum purchase per article: 300 pcs
Delivery times
• If there is an existing print template: 8 working days
• If a new print template has to be created: 3 weeks
Print colour:
Black (colour printing not possible)
Datasheets(X)
 | |
Material | Brass |
Surface | Chrome plated |
Connection thread | 1/2 inch |
Compression fitting | 3/8 inch x 10 mm |
Approval mark | DVGW |
Design | Printed |
Diameter of printable area | 16 mm |
Last viewed
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Neck protector
Thin-walled heat-shrink hose Shrink rate 2:1 without internal adhesive
Work dungarees
PH screwdriver with wooden handle
Dust protection filter for angle grinder
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Drilling screw, hexagon head with reduced drill tip and sealing washer piasta®
90° angled male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
Hexagonal bolt