DS 35 core drill
Core drill DS 35-T
CREDRL-EL-DS35
Register now and access more than 125,000 products
- The light and fast DS 35 has been specially developed for drilling anchor holes
- For manual drilling or in combination with the tapping/water extraction system, which ensures controlled, precise and clean work
- The lightweight aluminium body with T-handle and other accessories such as the second handle or shoulder support ensure optimum handling in horizontal and vertical applications
- The soft start function reduces the speed by half for 10 seconds, making tapping into base materials much easier
- Due to the high speed, drilling with reinforcement bars is completed quickly and precisely
- Impact-free drilling is an advantage for applications using brittle materials and for drilling at edges. Furthermore, drilling is virtually vibration- and noise-free compared to hammer drills.
- Personal safety is ensured by the integrated PRCD-S circuit breaker
- The machine spindle has a ½ inch internal thread tool holder, which makes it perfect for use with our core drill bits
- Longer service life due to electronic overload protection, as the motor speed is reduced electronically in the event of overload
- The pulsating power reduction and optical warning from the LEDs give a warning to the operator. Then the tool switches off automatically in order to protect the motor. Unlike with a thermal protection function, however, the power tool can be switched on again immediately
Mainly suitable for use in diamond core drilling applications. In combination with the portfolio of Würth core drill bits
Longlife & Speed 1/2 inch wet diamond core drill bit up to and including 35 mm (art. no. 5456 070 XXX)
For fastening systems, the product is readily approved for the following systems:
- Injectable mortar concrete specialist WIT-VIZ (0905 4400 0X)
- Injectable mortar PURE EPOXY WIT-PE 1000 (5918 605X XX)
Nominal voltage | 230 V/AC |
Power input | 2400 W |
Idle speed 1st gear max. | 5600 rpm |
Min./max. drill hole diameter | 8-35 mm |
Weight of machine | 5.9 kg |
Length | 430 mm |
Width | 295 mm |
Height | 405 mm |
Idle speed 2nd gear max. | 5600 rpm |
Idle speed 3rd gear max. | 5600 rpm |
Datasheets (0)
Certificates/ Documents (0)
CASEINRT-(DS180-P/-T)
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive
EPS profile double cylinder
Pine tree clip with freestanding design
Work trousers
Pipe clamp According to DIN 3567, shape A
Sundström protective cover SR 345
Base height adjuster, type C Press-fit
System insert 8.4.1, combination wrench
Threaded rod
Cylindrical roller bearing FAG
