DSG clutch tool set 18 pieces
DSG coupling tool set 18 pieces
REP SOL DRY DBL CLUT AUDI/SEAT/ŠKODA/VW
Art.-no.
1952003080
EAN 4056807821566
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For the correct removal and installation of DSG clutches on VAG vehicles in accordance with the manufacturer's repair manual
Scope of delivery:
- 1 x support bridge for removing and installing the clutch housing (T10323)
- 1 x puller for clutch unit with bayonet fitting, new version (T10373A)
- 1 x end gauge for calibrating a new clutch pack (T10374), double-sided use – calculation of the depth of engagement bearings K1 + K2
- 1 x end gauge for calibrating a new clutch pack (T10466), double-sided use – calculation of the depth of engagement bearings K1 + K2 – new version from 06/2011
- 1 x pressure piece for installing and positioning the clutch unit (T10376)
- 1 x actuating tool for engagement lever for removal and installation of the mechatronics (T10407)
- 1 x mounting cone for clutch connector cover (T10302)
- 1 x retaining bolt for double clutch (T10303)
- 1 x lock ring pliers – removal of the circlip on the gear shaft.
Notice
- No calibration required if the clutch is only installed and removed.
- If the clutch pack is replaced, the clutch must be re-calibrated.
Product information
Datasheets(X)
Application area
- DSG 7-speed (code 0AM) until 05/2011 and DSG 7-speed (code 0AM) from 06/2011
- DSG 7-speed (code 0CW) S-tronic
- 6-speed manual gearbox (code 08D)
- DSG 6-speed wet (code 02E)
- VW Golf, Golf Plus, Eos, Jetta, Passat, Polo, Scirocco, Touran from MY 2004
- Audi A3 from MY 2004
- Seat Altea, Altea XL, Ibiza, Leon, Toldeo from MY 2004
- Skoda Fabia, Octavia, Roomster, Superb, Yeti from MY 2004
Number of pieces | 18 PCS |
Product weight (per item) | 12600.000 g |
Last viewed
VDE screwdriver For hexagon drive
Tap DN 45 thread for 5 l and 10 l plastic canisters
Adjustable T-shaped sealing cone fitting ISO 8434-1, zinc-nickel-plated steel, cutting ring connection with o-ring
Tray shelf For system storage boxes
Adhesive backing pad, hook-and-loop disc Klingspor HST 359
Hexagon nut with clamping piece (all-metal) ISO 7042, steel, strength class 8, zinc-nickel-plated, black (ZNBHL)
System connector SV 20 E, twin-pin
Thread-rolling screw
Mid side bolt for eccentric fitting 22
Foot air pump