Designer glass shelf support
Designer glass shelf support to insert
SHLFSPRT-INSERT-GLS-ZD-(NI)-8/10MM-PLGD5
Register now and access more than 125,000 products
- 5-mm diameter pins
- Clamping range up to 10 mm using the adjustment screw
- Load capacity: 6.5 N/dm² (4 supports in accordance with DIN EN 14749)
Material: Die-cast zinc, nickel-plated, with plastic adjustment screw (PA6)
- High degree of resistance to breakage
- Elegant, high-quality surface
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Material | Die-cast zinc |
Surface | Nickel plated |
Drill diameter | 5 mm |
Min. drill hole depth | 8 mm |
Min. glass thickness | 8 mm |
Max. glass thickness | 10 mm |
Last viewed
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Tool holder thread cutter Ruko tool holder with ratchet
Safety boots, S2
Hexagon socket set screw with pin ISO 4028, steel, 45H, zinc-plated, blue passivated (A2K)
System workshop trolley BASIC 8.4
Stud with threaded end ≈ 2d
Drawer divider set, BASIC, 12 compartments
Sports strap Infield 9993
Pipe clamp TIPP® solid with 3/4 inch threaded sleeve
EPS profile double cylinder