Designer glass shelf support With rubber cover
Designer glass shelf support
SHLFSPRT-INSERT-DESIGN-GLSFLR-PLUGD5
Register now and access more than 125,000 products
Material: Die-cast zinc, nickel-plated
- High break resistance
- High-quality surface
Pins Ø 5-mm, mitred
Stays securely in place on the side of the cupboard
Translucent rubber pad
Compartment base does not rattle
Load-bearing capacity: 6.5 N/dm² (four supports in accordance with DIN EN 14749)
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Material | Die-cast zinc |
Surface | Nickel plated |
Drill diameter | 5 mm |
Min. drill hole depth | 8 mm |
Last viewed
FLEXEN® PE
Cap EN10242 T1, hot-dip galvanised malleable iron
Blind bucket rivet, flat head
Plumber's sealing screw, A2 stainless steel
Hexagon socket set screw with flattened tip ISO 4027, steel 45H, zinc-nickel-plated, black (ZNBHL)
Clamping bracket for notching in For base height adjuster type B and type C
System box
HSCo Longlife TiAlN+ red-ring machine tap for blind holes DIN 371/376
Stirrup handle On exterior plate
Protective sleeves GPN 200, shape A Polyethylene (PE-LD), natural