Diamond cutting disc Klingspor DT 300 F Extra
Diamond cutting disc DT 300 F Extra Klingspor
DIADDISC-KLINGSPOR-325359-7X1,6-D180
Art.-no. 1971012128
EAN 4014855218455
Register now and access more than 125,000 products
This high-quality diamond cutting disc is suitable for all users who value professional tools but do not use them every day. The continuous rim of the disc allows precise working. This allows everyone to produce clean and break-free edges. The cutting disc is optimised for cutting glazed and unglazed tiles. With a medium aggressiveness and service life, the DT 300 F Extra diamond cutting disc is an attractive quality disc for occasional use.
Datasheets(X)
Diameter (Ø) | 180 mm |
Bore hole | 22.23 mm |
Segment height | 7 mm |
Segment thickness | 1.6 mm |
Max. rotation speed | 8500 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Threaded fitting DIN 976, zinc plated 8.8 steel with thick-layer passivation (VZD)
Low-cut safety shoe S3 Steitz MED 1000 Perbunan
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Lightweight clamping pin Type L, plain spring steel
Hexagon bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
K Plus insulation pipe clamp with separate insulation part
Hexagonal bolt with thread up to the head ISO 4017, zinc plated 8.8 steel with thick-layer passivation (VZD)
Connector, pneumatic
Hexagonal bolt with thread up to the head ISO 4017, silver zinc-nickel plated 8.8 steel (ZNSHR)