Diamond cutting disc Klingspor DT 350 U Extra
Diamond cutting disc DT 350 U Extra Klingspor
DIADDISC-KLINGSPOR-336223-10X2,8-D300
Register now and access more than 125,000 products
The DT 350 U Extra diamond cutting disc is designed for machining construction site materials and concrete. The focus of this product is on construction site materials that place high demands on the performance of a cutting disc - the disc is equipped with laser-welded standard segments for machining these materials. The user benefits from easy, low-vibration and fast cutting with an excellent service life. Thanks to the standard toothing used, the disc achieves a good feed speed and shows good cutting performance under a wide range of conditions.
Datasheets(X)
Diameter (Ø) | 300 mm |
Drill hole | 20 mm |
Segment height | 10 mm |
Segment thickness | 2.8 mm |
Max. rotation speed | 6400 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
Disposable PP hard film key fob
Bit bars 8 pieces
Screw with flattened half round head and hexagon socket ISO 7380-1 A2-070 stainless steel, plain
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Round head screw with square neck DIN 603, steel 10.9, zinc-plated, blue passivated (A2K)
Welded stud
Pan head tapping screw, shape C with AW drive
3KS Plus profile double cylinder For keyed alike profile cylinders in original equipment
Plus Quadro-L Vario hammer drill bit