Diamond cutting disc Klingspor DT 350 U Extra
Diamond cutting disc DT 350 U Extra Klingspor
DIADDISC-KLINGSPOR-350464-10X2,4-D125
Register now and access more than 125,000 products
The DT 350 U Extra diamond cutting disc is designed for machining construction site materials and concrete. The focus of this product is on construction site materials that place high demands on the performance of a cutting disc - the disc is equipped with laser-welded standard segments for machining these materials. The user benefits from easy, low-vibration and fast cutting with an excellent service life. Thanks to the standard toothing used, the disc achieves a good feed speed and shows good cutting performance under a wide range of conditions.
Datasheets(X)
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Segment height | 10 mm |
Segment thickness | 2.4 mm |
Max. rotation speed | 12200 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Segmented Grinding Disc for Steel Synthetic corundum
S1PL safety shoe New Balance Logic Womens 1264
Sleeve, reduced with female thread EN10242 M2, plain malleable iron
Safety goggles uvex astrospec 2.0 9164
Safety sandal S1
Square plug-in torque wrench head Stahlwille 734
Twist drill bit HSCo DIN 338 type RN bronze point thinning
Safety boots, S3
DIN 6885 plain steel C45K, shape E
Work jacket