Diamond cutting disc Klingspor DT 600 U Supra
Diamond cutting disc DT 600 U Supra Klingspor
DIADDISC-KLINGSPOR-325201-10X3,6-D450
Register now and access more than 125,000 products
The DT 600 U Supra diamond cutting disc enables a wide range of cutting work with no changeover time. It cuts construction site materials from used concrete and concrete to sand-lime brick safely and reliably. Thanks to its short toothing with laser-welded segments, it is extremely cutting-friendly and enables light cuts with clean edges. Even with harder materials, its service life is still very good. The DT 600 U belongs to the Klingspor Supra performance class. This makes it a flexible, powerful professional tool for daily use.
It is available for angle grinders and as a large diamond cutting disc for bench saws and petrol disc cutters.
Datasheets(X)
Diameter (Ø) | 450 mm |
Drill hole | 25.4 mm |
Segment height | 10 mm |
Segment thickness | 3.6 mm |
Max. rotation speed | 4300 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
HPC solid carbide drill Speeddrill 4.0-Universal, DIN 6537L, long 5xD, 4 drill heels, with internal cooling
Hexagonal bolt with thread up to the head
Jacket Planam Highline
Identification rings, PVC
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Ear plugs x-200
Slotted countersunk head screw DIN 963, brass, plain
Safety boots, S3
End cap set For REDOSLIDE Z60-HW/Z100-HW interior sliding door fitting
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain