Diamond cutting disc Klingspor DT 600 U Supra
Diamond cutting disc DT 600 U Supra Klingspor
DIADDISC-KLINGSPOR-347485-10X3,6-D400
Register now and access more than 125,000 products
The DT 600 U Supra diamond cutting disc enables a wide range of cutting work with no changeover time. It cuts construction site materials from used concrete and concrete to sand-lime brick safely and reliably. Thanks to its short toothing with laser-welded segments, it is extremely cutting-friendly and enables light cuts with clean edges. Even with harder materials, its service life is still very good. The DT 600 U belongs to the Klingspor Supra performance class. This makes it a flexible, powerful professional tool for daily use.
It is available for angle grinders and as a large diamond cutting disc for bench saws and petrol disc cutters.
Datasheets(X)
Diameter (Ø) | 400 mm |
Drill hole | 25.4 mm |
Segment height | 10 mm |
Segment thickness | 3.6 mm |
Max. rotation speed | 4800 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
Hexagonal bolt with shank DIN 931, steel 10.9, zinc-plated, blue passivated (A2K)
90° angled male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
Work jacket
T-piece EN1254, gunmetal, 3130
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Profile half cylinder EPS
T-shaped push-in fitting, long version
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Pan head tapping screw, shape C with AW drive
Ducting clamp Part 1 – Light series