Diamond cutting disc Klingspor DT 600 U Supra
Diamond cutting disc DT 600 U Supra Klingspor
DIADDISC-KLINGSPOR-350462-9X2,4-D125
Register now and access more than 125,000 products
The DT 600 U Supra diamond cutting disc enables a wide range of cutting work with no changeover time. It cuts construction site materials from used concrete and concrete to sand-lime brick safely and reliably. Thanks to its short toothing with laser-welded segments, it is extremely cutting-friendly and enables light cuts with clean edges. Even with harder materials, its service life is still very good. The DT 600 U belongs to the Klingspor Supra performance class. This makes it a flexible, powerful professional tool for daily use.
It is available for angle grinders and as a large diamond cutting disc for bench saws and petrol disc cutters.
Datasheets(X)
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Segment height | 9 mm |
Segment thickness | 2.4 mm |
Segment connection | 0 - not applicable |
Max. rotation speed | 12200 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
System insert, plastic, 4.4.1
Quick-mounting system For floor panels
Standard car windscreen wiper With pre-assembled multi-adapter
Nipple, pneumatic
Safety screw with hexalobular head and pin Similar to ISO 10642 because of TX drive, A2 stainless steel, plain
Hexagon Socket Head Cap Screw
Low-cut safety shoes, S2
AL 920 door handle on outer plate With CK punch
VLB 60 door hinge, 3D design
Hexagonal bolt with thread up to the head