Diamond cutting disc Klingspor DT 602 A Supra
Diamond cutting disc DT 602 A Supra Klingspor
DIADDISC-KLINGSPOR-325171-10X3,7-D500
Register now and access more than 125,000 products
The DT 602 A Supra large diamond cutting disc by Klingspor is highly suited to cutting and separating asphalt, sandstone and other abrasive materials.
It can be used on all conventional floor saws and petrol disc cutters.
Advantages:
- Good cutting speed
- Protection segments to protect the core
- Great value for money
Datasheets(X)
Diameter (Ø) | 500 mm |
Drill hole | 25.4 mm |
Segment height | 10 mm |
Segment thickness | 3.7 mm |
Segment connection | 0 - not applicable |
Max. rotation speed | 3900 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
Twist drill bit assortment HSCo DIN 338 type RN Oxide 19 pieces
Pan Head screw with hexalobular head ISO 14583, steel 8.8, zinc-plated, blue passivated (A2K)
Abrasive fleece roll VSM KV701
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, steel, zinc-plated, blue passivated, shape C (with tip)
EPS profile thumbturn cylinder
Straight male fitting ISO 8434-1, stainless steel 1.4571, NPT male thread
Adjustable L-shaped sealing cone fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
Safety shoes, S2
Pan head tapping screw, shape C with Z recessed head ISO 7049, steel, zinc-plated, blue passivated, shape C (with tip)
Hexagon nut, low profile with fine thread DIN 439, A4 stainless steel, plain