Diamond cutting disc Klingspor DT 612 UT Supra
Diamond cutting disc DT 612 UT Supra Klingspor
DIADDISC-KLINGSPOR-334045-12X2,4-D125
Register now and access more than 125,000 products
The DT 612 UT Supra diamond cutting disc from Klingspor was specially developed for use on angle grinders. Thanks to its aggressive cutting and grinding performance, the tool is suitable for machining concrete, used concrete, reinforced building materials, sand-lime brick and other construction site materials.
Special turbo segments ensure high cutting speeds when machining most hard materials. At the same time, they support the long service life of the cutting disc - even when cutting reinforced concrete.
Datasheets(X)
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Segment height | 12 mm |
Segment thickness | 2.4 mm |
Max. rotation speed | 12200 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Plus Quadro-L Vario hammer drill bit
Grooved nut with fine thread DIN 1804, steel, zinc-plated, blue passivated (A2K)
Work dungarees
Twist drill bit, metal Ruko DIN 338 HSS-R black oxidised
Partition walls For storage bins
Hexalobular-type cheese head screw ISO 14579, steel 8.8, zinc-plated, blue passivated (A2K)
Slotted flat-head screw DIN 85, steel 4.8, zinc-plated, blue passivated (A2K)
Injector socket set 3 pieces, for Bosch/Mercedes
Shoe accessories
Drawer divider set BASIC, 12-compartment