Diamond cutting disc Klingspor DT 612 UT Supra
Diamond cutting disc DT 612 UT Supra Klingspor
DIADDISC-KLINGSPOR-340224-12X2,8-D300
Register now and access more than 125,000 products
The DT 612 UT Supra diamond cutting disc from Klingspor was specially developed for use on angle grinders. Thanks to its aggressive cutting and grinding performance, the tool is suitable for machining concrete, used concrete, reinforced building materials, sand-lime brick and other construction site materials.
Special turbo segments ensure high cutting speeds when machining most hard materials. At the same time, they support the long service life of the cutting disc - even when cutting reinforced concrete.
Datasheets(X)
Diameter (Ø) | 300 mm |
Drill hole | 20 mm |
Segment height | 12 mm |
Segment thickness | 2.8 mm |
Max. rotation speed | 6400 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
Heat protection glove Ansell Crusader Flex® 42-445
Plumber's sealing screw, colour
Snap ring for bearing with ring groove
Stretch X overall
Guide head For CPS cable feed devices (apart from CPS 1)
Twist drill bit HSS DIN 1869 R2 SMART STEP
Work polo shirt TJ1400
Hexagonal bolt with thread up to the head DIN 933, steel 10.9, zinc-plated, blue passivated (A2K)
Work dungarees
Bond and Seal Power structural adhesive