Diamond cutting disc Klingspor DT 900 U Special
Diamond cutting disc DT 900 U Special Klingspor
DIADDISC-KLINGSPOR-325028-12X2,6-D180
Register now and access more than 125,000 products
The DT900 U Special diamond cutting disc from Klingspor is aggressive. The razor-sharp titanium-coated diamonds uncompromisingly work their way through construction site materials, concrete, used concrete, reinforced used concrete, sand-lime brick and almost any hard stone.
The DT 900 U Special diamond cutting disc is designed for optimum performance and maximum service life. The special turbo segments enable a very high cutting speed on almost all hard materials. At the same time, the notches in the core effectively stop high temperatures being generated. This results in precise cuts. Even with very brittle material or steel struts in used concrete, the DT 900 U Special diamond cutting disc cuts reliably.
Datasheets(X)
Diameter (Ø) | 180 mm |
Drill hole | 22.23 mm |
Segment height | 12 mm |
Segment thickness | 2.6 mm |
Max. rotation speed | 8500 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
T-handle, TX with side tip
Complete printed Clipster number plate holder
Work dungarees
Adjustable straight sealing cone reducer fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
EPS profile thumbturn cylinder
Hexagonal bolt with thread up to the head
Jacket lined Stretch X logo Eugster Frismag
Low-cut safety shoes, S1
Angle bracket type A
Safety boots S3