Diamond cutting disc Klingspor DT 900 U Special
Diamond cutting disc DT 900 U Special Klingspor
DIADDISC-KLINGSPOR-325084-10X3-D350
Register now and access more than 125,000 products
The DT900 U Special diamond cutting disc from Klingspor is aggressive. The razor-sharp titanium-coated diamonds uncompromisingly work their way through construction site materials, concrete, used concrete, reinforced used concrete, sand-lime brick and almost any hard stone.
The DT 900 U Special diamond cutting disc is designed for optimum performance and maximum service life. The special turbo segments enable a very high cutting speed on almost all hard materials. At the same time, the notches in the core effectively stop high temperatures being generated. This results in precise cuts. Even with very brittle material or steel struts in used concrete, the DT 900 U Special diamond cutting disc cuts reliably.
Datasheets(X)
Diameter (Ø) | 350 mm |
Drill hole | 30 mm |
Segment height | 10 mm |
Segment thickness | 3 mm |
Segment connection | 0 - not applicable |
Max. rotation speed | 5500 rpm |
Max. circumferential speed | 104 m/s |
Last viewed
Star-shaped handle with connector and male thread
ORSY®BULL series 5 top loader combination box
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
DIN 976-1 steel 5.6 galvanised shape A
Ducting clamp assortment 3-piece DP AS
Wire cable barrel terminal With eye
Plastic frame anchor W-UR 10 XS W-UR 10 XS for use in perforated brick with small chambers and thin webs in conjunction with the AMO Combi screw
Malleable iron screw clamp with protective caps
Cylindrical pin, unhardened
Tension spring with double eyes DIN 2097, spring steel wire, zinc-plated steel