Diamond cutting disc Klingspor DT 900 U Special
Diamond cutting disc DT 900 U Special Klingspor
DIADDISC-KLINGSPOR-325133-10X3,6-D450
Register now and access more than 125,000 products
The DT900 U Special diamond cutting disc from Klingspor is aggressive. The razor-sharp titanium-coated diamonds uncompromisingly work their way through construction site materials, concrete, used concrete, reinforced used concrete, sand-lime brick and almost any hard stone.
The DT 900 U Special diamond cutting disc is designed for optimum performance and maximum service life. The special turbo segments enable a very high cutting speed on almost all hard materials. At the same time, the notches in the core effectively stop high temperatures being generated. This results in precise cuts. Even with very brittle material or steel struts in used concrete, the DT 900 U Special diamond cutting disc cuts reliably.
Datasheets(X)
Diameter (Ø) | 450 mm |
Drill hole | 25.4 mm |
Segment height | 10 mm |
Segment thickness | 3.6 mm |
Segment connection | 0 - not applicable |
Max. rotation speed | 4300 rpm |
Max. circumferential speed | 109 m/s |
Last viewed
Milling cutter SC SPEEDCUT Aluminium XL HB, triple blade
Stretch X shorts
Blind rivet, flat head
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Rivet nuts with small countersunk head, assortment 506 pcs
O-ring, metric
Raised countersunk head screw with Z recessed head DIN 966, A2 stainless steel, plain
Hexagon socket set screw with pin ISO 4028, steel, 45H, zinc-plated, blue passivated (A2K)
Non-slip plate
Bar handle For standard kitchen dimensions