Diamond cutting disc Klingspor DT 900 U Special
Diamond cutting disc DT 900 U Special Klingspor
DIADDISC-KLINGSPOR-325164-10X3,7-D500
Register now and access more than 125,000 products
The DT900 U Special diamond cutting disc from Klingspor is aggressive. The razor-sharp titanium-coated diamonds uncompromisingly work their way through construction site materials, concrete, used concrete, reinforced used concrete, sand-lime brick and almost any hard stone.
The DT 900 U Special diamond cutting disc is designed for optimum performance and maximum service life. The special turbo segments enable a very high cutting speed on almost all hard materials. At the same time, the notches in the core effectively stop high temperatures being generated. This results in precise cuts. Even with very brittle material or steel struts in used concrete, the DT 900 U Special diamond cutting disc cuts reliably.
Datasheets(X)
Diameter (Ø) | 500 mm |
Drill hole | 25.4 mm |
Segment height | 10 mm |
Segment thickness | 3.7 mm |
Segment connection | 0 - not applicable |
Max. rotation speed | 3900 rpm |
Max. circumferential speed | 113 m/s |
Last viewed
SNAP marker
MFD-S multi-purpose drill bit with straight shank
Hexagonal bolt with shank DIN 931, steel 10.9, zinc-plated, blue passivated (A2K)
Connecting technology
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Hexagon nut, low profile, with clamping piece (non-metal insert) ISO 10511, steel 5, zinc-plated, thick-film passivated (VZD)
Hand tap, second tap HSS DIN 352
Hexagonal bolt with thread up to head ISO 4017, steel strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)