Diamond cutting disc Klingspor DT 900 U Special
Diamond cutting disc DT 900 U Special Klingspor
DIADDISC-KLINGSPOR-325206-12X2,4-D115
Register now and access more than 125,000 products
The DT900 U Special diamond cutting disc from Klingspor is aggressive. The razor-sharp titanium-coated diamonds uncompromisingly work their way through construction site materials, concrete, used concrete, reinforced used concrete, sand-lime brick and almost any hard stone.
The DT 900 U Special diamond cutting disc is designed for optimum performance and maximum service life. The special turbo segments enable a very high cutting speed on almost all hard materials. At the same time, the notches in the core effectively stop high temperatures being generated. This results in precise cuts. Even with very brittle material or steel struts in used concrete, the DT 900 U Special diamond cutting disc cuts reliably.
Datasheets(X)
Diameter (Ø) | 115 mm |
Drill hole | 22.23 mm |
Segment height | 12 mm |
Segment thickness | 2.4 mm |
Max. rotation speed | 13300 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Flat head tapping screw, type C with hexalobular socket
Cable
Stretch X vest
Countersunk tapping screw, shape C with AW drive WN 112-compliant, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Insect remover
Steel door solid spindle 9 mm with M8 thread
Knife accessories Martor presentation folder, PHV small 900953.08
Tool case 32 pieces in system case 8.4.2.
Concealed hinge TIOMOS Impresso 155
Handle