Diamond cutting disc Klingspor DT 900 UT Special
Diamond cutting disc DT 900 UT Special Klingspor
DIADDISC-KLINGSPOR-325364-10X2,2-D115
Register now and access more than 125,000 products
The sintered diamond cutting disc achieves its full potential on the construction site, effortlessly cutting a wide variety of materials: concrete, roof tiles and all other construction site materials.
This makes it highly versatile and a perfect aid for a wide range of tasks. The DT 900 UT Special diamond cutting disc is suitable for conventional angle grinders with a mount of 22.23 mm. Innovative technology enables fast working with maximum safety.
The wavy steel blade optimally dissipates heat. Holes in the disc also promote cooling. It can be used wet and dry. The diamond cutting disc has a high degree of aggressiveness and an above-average service life.
Datasheets(X)
Diameter (Ø) | 115 mm |
Drill hole | 22.23 mm |
Segment height | 10 mm |
Segment thickness | 2.2 mm |
Max. rotation speed | 13300 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Hexagonal bolt
Work dungarees
Helical insert W.TEC® INSERT COIL Free Running
Lintel casing bracket For door closer with scissor arm mechanism or slide rail
Semi-orthopaedic insoles
Empty case For MH 10-SE chipping hammer
Work overall
SNAP marker
Tipp® VDS loop hanger For fastening sprinkler lines in fixed water-based fire extinguishing systems according to VdS guidelines
Sanding belt, fabric VSM KK712X