Diamond cutting disc Klingspor DT 900 UT Special
Diamond cutting disc DT 900 UT Special Klingspor
DIADDISC-KLINGSPOR-325365-10X2,2-D125
Register now and access more than 125,000 products
The sintered diamond cutting disc achieves its full potential on the construction site, effortlessly cutting a wide variety of materials: concrete, roof tiles and all other construction site materials.
This makes it highly versatile and a perfect aid for a wide range of tasks. The DT 900 UT Special diamond cutting disc is suitable for conventional angle grinders with a mount of 22.23 mm. Innovative technology enables fast working with maximum safety.
The wavy steel blade optimally dissipates heat. Holes in the disc also promote cooling. It can be used wet and dry. The diamond cutting disc has a high degree of aggressiveness and an above-average service life.
Datasheets(X)
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Segment height | 10 mm |
Segment thickness | 2.2 mm |
Segment connection | 0 - not applicable |
Max. rotation speed | 12200 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Slotted set screw with tip DIN 553, steel, 14H, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw
Castellated nut DIN 935, A2 stainless steel, plain
EPS profile double cylinder
Work trousers
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, plain
Plastic frame anchor SHARK® UR Zinc-plated steel
Union nut ISO 8434-1, zinc-nickel-plated steel
Rubber grommets made of polychloroprene rubber Insulating sleeves CR
Radiator paint brush DW light For dispersions and wall paints