Diamond cutting disc for asphalt Diamond cutting disc developed for road construction

Name: Diamond cutting disc for asphalt Diamond cutting disc developed for road construction
Brand: Würth
SKU: 0668751401

Diamond cutting disc asphalt hand/joint saw
CUTDISC-DIA-ASPHALT-BR25,4-D400MM

Art.-no. 0668751401

EAN 4048539445165

All versions

Specification

Diamond cutting disc developed for road construction

Notice

Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds

If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts

Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.

Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury!

Despite the level of safety offered by the tool, always wear safety glasses and clothing while working

Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions

Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)

If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury

Application area

For tarmac, concrete (abrasive), young concrete, mortar, plaster, screed, soft sand-lime brick