Diamond cutting disc, long-life, asphalt
Diamond cutting disc L asphalt hand/joint saw
CUTDISC-DIA-LL-ASPHALT-BR25,4-D400MM
ZEBRA
Register now and access more than 125,000 products
Longlife
Optimised service life with increased ease of cutting
Particularly high segments: 15 mm
Special protective segments protect the main blade against undercut
- Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds
- If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Cut larger workpiece cross-sections into several sections (swing cut)
- Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury!
- Despite the level of safety offered by the tool, always wear safety glasses and clothing while working
- Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions
- The direction arrow on the disc must match the machine's direction of rotation
- Must not be used for lateral grinding
- Use the appropriate protective hood
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Datasheets(X)
- Ideal for: Tarmac, concrete (abrasive), young concrete, mortar, plaster, screed and soft sand-lime brick
- For hand-held cutters and floor saws
- For dry and wet cutting
Diameter (Ø) | 400 mm |
Drill hole | 25.4 mm |
Segment height | 15 mm |
Segment thickness | 3.4 mm |
Number of segments | 24 PCS |
Segment connection | Laser |
Max. rotation speed | 4800 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Sanding belt for tube belt sander
Injection adapter WIT-IA for ensuring that mortar-filled drill holes contain no air bubbles
System workbench 1500 mm with 2 height-adjustable workbench feet and drawer wall-mounted cabinet 8.6
Hexagon socket set screw with truncated cone ISO 4026 A4 stainless steel 21H, plain
Engine oil TRIATHLON® Cargo Super 10W-40
Machine tap Speedtap 4.0-Ultra Hard Steel 63 HRC, straight grooved For metric ISO fine thread DIN 13
Hexagonal nut
Screw tap, machine, blind hole Ruko M DIN 376 HSS-TiAlN shape C
Hexagonal nut ISO 4032 steel 6/8, zinc-plated blue passivated (A2K)