Diamond cutting disc, long-life, asphalt
Diamond cutting disc L asphalt hand/joint saw
CUTDISC-DIA-LL-ASPHALT-BR25,4-D500MM
ZEBRA
Register now and access more than 125,000 products
Longlife
Optimised service life with increased ease of cutting
Particularly high segments: 15 mm
Special protective segments protect the main blade against undercut
- Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds
- If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Cut larger workpiece cross-sections into several sections (swing cut)
- Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury!
- Despite the level of safety offered by the tool, always wear safety glasses and clothing while working
- Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions
- The direction arrow on the disc must match the machine's direction of rotation
- Must not be used for lateral grinding
- Use the appropriate protective hood
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Datasheets(X)
- Ideal for: Tarmac, concrete (abrasive), young concrete, mortar, plaster, screed and soft sand-lime brick
- For hand-held cutters and floor saws
- For dry and wet cutting
Diameter (Ø) | 500 mm |
Drill hole | 25.4 mm |
Segment height | 15 mm |
Segment thickness | 4 mm |
Number of segments | 30 PCS |
Segment connection | Laser |
Max. rotation speed | 3800 rpm |
Max. circumferential speed | 100 m/s |
Last viewed
Slotted raised countersunk head screw ISO 2010, A2 stainless steel, plain
Hexagonal bolt
Safety boots S3 Uvex2 STX 6525
Grid side wall For boltless rack
Additional item, pipe extension
ISO insert holder with P clamping system for SN indexable inserts
Low-cut safety shoes, S1
Hexagonal bolt with thread up to the head
Deep groove ball bearing FAG
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6