Diamond cutting disc tile hard Speed Turbo
Diamond cutting disc tile hard Speed Turbo
CUTDISC-DIA-SP-TILESHARD-BR22,23-D115
ZEBRA
Register now and access more than 125,000 products
Closed cutting edge with turbo segment structure
For an extremely fast and extremely clean cut
Significantly reduced tendency to wobble
The disc diameters 115 and 125 mm are additionally stabilised by a new shaft structure reinforcement around the flange
Extended service life
In comparison to conventional tile-cutting discs, the 10-mm-high segment guarantees a considerably longer service life
- Diamond cutting discs become dull at excessively high speeds and wear too rapidly at insufficient circumferential speeds
- If the ease of cutting decreases (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Separate larger workpiece cross-sections in several sections (swing cut)
- Work without pressure — the weight of the machine is sufficient. Increased pressure causes increased wear
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs — risk of injury!
- Although the tool is safe, always wear safety goggles and clothing while working
- Observe the information on the label (max. speed), restrictions of use and safety instructions
- The direction arrow on the disc must match the machine's direction of rotation
- Must not be used for lateral grinding
- Use the appropriate protective hood
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Datasheets(X)
- For dry and wet cutting
- Ideal for tiles, very hard fired stoneware, glazed tiles, earthenware (gres), soft/hard granite, marble and other natural stones, soft/hard and glazed clinker (brick slips)
Versatility (points system) | 3 of 4 points |
Service life (points system) | 3 of 4 points |
Cutting speed (point system) | 4 of 4 points |
Cut quality (point system) | 4 of 4 points |
Diameter (Ø) | 115 mm |
Drill hole | 22.23 mm |
Segment height | 10 mm |
Segment thickness | 1.4 mm |
Segment connection | Sintered |
Max. rotation speed | 13300 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Mini barrel terminal With external thread
Textile protective glove Ejendals TEGERA® 921
Protective glove, chemicals
EPS profile thumbturn cylinder
Neon high-visibility dungarees, class 2
S1P safety shoes RUNNEX® GirlStar 5180
S1P safety shoes Base B1206A
Slotted headless screw with flat point DIN 427, steel 14H, zinc-plated blue passivated (A2K)
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Hose clamp DIN 3017-1, shape A, W5, BASIC-Line