Disinfectant gel
Hand sanitiser gel for washroom dispensers
HNDSANTSGEL-1000ML
Register now and access more than 125,000 products
Comprehensively effective against bacteria, fungi and enveloped viruses
Limited virus-inactivating capability after 15 sec.
Hygienic hand disinfection in 30 sec.
Full virus-inactivating capability after 60 sec.
- High-proof ethanol base
- Skin-friendly (dermatologically tested)
- HACCP-compliant — suitable for use in the food industry
- VAH-listed
- Bactericide (incl. MRSA)
- Tuberculocide
- Yeasticide (C. albicans)
- Virucidal to a limited degree (corona-/polio-/adeno-/noroviruses)
Take care when using biocidal products. Always read the label and product information before use.
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
- For hygienic hand disinfection according to EN 1500
- Also suitable for the handling of foodstuffs
Apply around 3 ml of gel to dry and clean hands twice and rub in thoroughly. Hands must continuously be kept moist while the gel is rubbed in for 30 seconds. After washing hands with soap, rinse hands thoroughly with water.
Chemical basis | Ethanol |
Smell/fragrance | Product-typical |
Colour | Colourless |
Contents | 1000 ml |
Shelf life from production/conditions | 30 Month / at room temperature, in the original container |
Viscosity/consistency | Gel |
pH value / conditions | 8 / undiluted |
Density/conditions | 0.838 g/cm³ / at 20°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Button-head rivet
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Flat washer For hexagon head bolts and nuts DIN 125, A4 stainless steel
Smoothing trowel
Xenon tubes for flashing beacon dome For Xenon flashing beacons
Hexagonal bolt with shank
System insert, raster foam Pluck out the foam cubes to fit around items
Countersunk screw with hexalobular head ISO 14581, steel 8.8, zinc flake, silver (ZFSHL)
Layer thickness measuring instrument, combination
Saddle washer for trapezoidal profile