Door for light dome safety device
DOMELGHTSYS-DOOR-W.BALLASTWEIGHT-G758
Art.-no. 0838906758
EAN 4062856710317
Register now and access more than 125,000 products
- Self-closing after opening
- With additional post and ballast weight
- Loose concrete flakes may remain on the concrete weights of the edge protection system due to the manufacturing and transport process
- The thin layer of cement paste in the anchoring hole of the concrete weights can be penetrated with a screw
- The cement paste residue in the anchoring hole and the concrete flakes must be removed from the roof
- This article is subject to extra transport costs and, if applicable, a minimum quantity surcharge. Please contact your local Würth sales representative for more information
- Tested in line with EN 13374 (2019) Class A
Datasheets(X)
Door for collective temporary protective measure for all openings secured with the dome light system. Used during the building or maintenance of buildings or other constructions. Reduces the risk of falling at slab edges (e.g. roof edge, non-puncture-proof light dome and light strips). Light dome safety devices are fixed as self-supporting systems with weights.
Max. post distance | 280 cm |
Material | Aluminium |
Width | 658 mm |
Overall height | 746 mm |
EN standard | 13374:2013 + A1:2018 |
Last viewed
Round wire snap ring and snap ring groove for shafts DIN 9925, steel plain
Hexagon bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Cut-resistant glove W-400 level E
Work dungarees Bodyforce 3125 5302
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, zinc plated 10 steel with thick-layer passivation (VZD)
EPS profile thumbturn cylinder
FKM 70 Shore O-ring ISO 3601-1
High-visibility jacket ROFA MULTI NINE parka 367
Fitting, flat sealing, with female and male thread EN10242 U2, hot-dip galvanised malleable iron
EPS profile thumbturn cylinder