Door handle A 806 on oval escutcheon
Door handle hole plate A 806
DH-A2-A806-OVAL-ROS-L/R-MATT
Register now and access more than 125,000 products
- Handle and base rosette are permanently connected and ensure the best possible hold, attachment is via rivet nuts and metric screws
- Versatile combination options and low storage costs, as all articles individually available
- The hole plates can be used in DIN R and DIN L doors without alteration
Square pins or panic pins must be ordered separately.
The FS approval only applies to complete Würth FS sets or combinations of Würth FS individual parts that form a coordinated assembly in accordance with DIN 18273. Only genuine Würth parts may be used for assembly. The assembly work, incl. all components (screws and pins), must be performed by a qualified expert according to the instructions. Failure to do so will void any warranty claim.
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
For real estate sector (tubular frame doors).
 | |
Punched-hole | 0 - not applicable |
Area of application | Object area, Private area |
Rosette thickness | 13.5 mm |
Suitable for | House doors, Office doors, Surgery doors, Profiled frame doors, Tubular door frames |
Design | 0 - not applicable |
Fire protection certified | No |
Shape of door handle | GE (Frankfurt type) |
Bearing Technology | Door handle, fixed, Spring-mounted |
Material | Stainless steel A2, 1.4301 |
Gloss level | Matt |
Surface | 0 - not applicable |
Colour | 0 - not applicable |
DIN direction | DIN R/L |
Standards | EN 1906 |
Utilisation category | Class 4 |
Environmental Product Declaration | Yes |
Type of assembly | Screw-on |
Square size | 8 mm |
Spindle | 0 - not applicable |
Insertion depth | 31 mm |
Handle length | 158 mm |
Handle diameter | 21 mm |
Hole distance | 50 mm |
Length of rosette | 70 mm |
Width of rosette | 33 mm |
Handle height inc. rosette/ label | 73 mm |
Knob/handle plate/loop handle | 0 - not applicable |
| For art. no. 0687 158 060 | Classification key in line with DIN EN 1906: 2012-12 | ||||||
| 4 | D9* | - | 0 | 1 | 4 | 0 | A |
| * 1 million test cycles, tested according to MPAZert | |||||||
| For art. no. 0687 158 560 | Classification key in line with DIN EN 1906: 2012-12 | ||||||
| 4 | D9* | - | B1 | 1 | 4 | 0 | A |
| * 1 million test cycles, tested according to MPAZert | |||||||
Last viewed
ASSY®plus VG 4 CSMP construction screw Steel zinc plated full thread countersunk milling pocket head
Stud screw Zinc-plated steel
Carpenters' case Mobile, empty
Twist drill bit HSCo DIN 340 type RN OXIDE
Circular saw blade, wood For cordless hand-held circular saw HKS 10-A/12-A
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Long magnetic push latch
Mounting set For tubular frame fittings on a long plate
VARIFIX® Systemfix quick fastener For assembly connection of all VARIFIX® 26/18; 26/26; 28/28 and 36/36 mounting rails
Snap ring shape SW for shaft