Double-end box wrench
Offset double box-end wrench inch
DBBOXENDWRNCH-DEPRESSED-INCH-1/2X9/16
ZEBRA
Register now and access more than 125,000 products
- Drive: Ring end POWERDRIV bi-hex
- Material: Chromium-vanadium steel
- Surface: chrome-plated, polished rings
- Geometry: Ring end offset 18°
Datasheets(X)
 | |
Width across flats | 1/2 x 9/16 inch |
Length (L) | 236 mm |
Ring thickness (a1) | 9 mm |
Ring thickness 2 (a2) | 10 mm |
External diameter of ring (d1) | 20 mm |
External diameter of ring 2 (d2) | 23 mm |
Height (h1) | 27 mm |
Height 2 (h2) | 27.5 mm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Tip type | Twelve-sided head |
Last viewed
Twist drill bit, metal Ruko DIN 338 type N HSS-G plain 118°
Safety boots, S3
Tapered pin, unhardened DIN 1 unhardened steel plain, version B (turned)
Low-cut safety shoes, S3
Drift punch According to DIN 6458
Jacket Planam Plaline
Connector, pneumatic
Square nut, low profile DIN 562, steel 11H, zinc-plated, blue passivated (A2K)
Double pipe clamp
Hexagonal bolt with thread up to the head