Double-sided adhesive tape MULTI
Assembly adhesive, universal
FSTNGTPE-DB-ASSEMBLY-UNI-50MMX25M
Register now and access more than 125,000 products
PP-based backing film
Excellent adaptation of the adhesive tape to smooth coverings and floors
Highly adhesive
Excellent adhesion, even to delicate surfaces such as PE and PP
The universal assembly adhesive tape is not resistant to UV; it should therefore not be exposed to direct sunlight
On plastics containing softener additives to be bonded, the softeners may change the adhesive coat, which may compromise the adhesive strength
The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!
Datasheets(X)
For a variety of applications in which a strong adhesive tape with thin carrier is required, such as securing textile coverings
- The substrates to be bonded must be completely dry, load-bearing and free from dust, grease and oil
- In order to ensure proper adhesion, the tape must be sufficiently pressed onto the material to be glued, if necessary with the press-on roller
- For sensitive and porous substrates (e.g. wood, stone), please carry out preliminary tests
Adhesive base | Synthetic natural rubber |
Backing material | PP foil |
Colour | White (base material) |
Roll width | 50 mm |
Length of roll | 25 m |
Thickness | 225 µm |
Min./max. processing temperature | 15 to 30 °C |
Min./max. temperature resistance | -10 to 50 °C |
Ultraviolet resistance | Limited |
Moisture resistance | Yes |
Tensile strength | 21 N/cm² |
Adhesive force at 25 mm | 20 N |
Elongation at break | 490 % |
Shelf life from production/conditions | 18 Month / dry and dust-free storage area, 20°C and 50% relative humidity |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
EPS profile double cylinder
Nozzle for monobolt blind studs
Tap wrench DIN 1814 Performance, adjustable
3/8 inch internal extractor, long
A 505 door handle
WE system workshop trolley
Insulation anchor SHARK® ISO A2 stainless steel, set
Engine oil Endurance IV 0W-20
Bottle for cordless concrete vibrator
STC+ end mill Turbo-Twister-Uni, five-cutter, unequal twist gradient, 2xD