Dowel pins
Rod anchor
RODPLG-(A2K)-10X65MM
Register now and access more than 125,000 products
- Chamfered for easier driving-in
- Material: steel S235
- Surface: blue passivated (A2K); ≥ 7 μm
- Application in utilisation classes 1 and 2
Install dowel pin flush with the timber surface. The hole in the wood must be no larger than the bar dowel diameter.
The inner sheet steel element in sheet steel to wood connections should be at least 3 mm thick as the minimum edge distances are determined exclusively from the edge distances in the wooden component from this thickness upwards.
Available work documents:
Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.
CE marking in line with EN 14592
Fastening inner steel to wood or wood to wood connections of e.g. post support brackets, join connections, tie rod connections or joist brackets.
The diameter of bore holes in the wood must correspond to the dowel pin diameter.
The diameter of bore holes in the metal may only be max. 1 mm larger (nominal external diameter) than the dowel pin diameter.
Diameter (Ø) | 10 mm |
Length (L) | 65 mm |
Material | Steel |
Material designation | S235 |
Surface | Zinc plated |
Yield moment | 56.1 Nm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Low-cut safety shoes, S3
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Kinvaro S-35 hinge flap fitting With integrated adjustable damping
Hexagon Socket Head Cap Screw full thread ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K), with full thread
Joint mortar CERAfix® 505 For natural-stone and ceramic floor and wall coverings. Joint width from 2 to 25 mm
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
A 502 window handle
ORSY®BULL partition elements For dividing ORSY®BULL top loader boxes according to individual requirements
Order protector with magnetic fastening
Tray
