Dowel pins
Rod anchor
RODPLG-(A2K)-20X280MM
Register now and access more than 125,000 products
- Chamfered for easier driving-in
- Material: steel S235
- Surface: blue passivated (A2K); ≥ 7 μm
- Application in utilisation classes 1 and 2
Install dowel pin flush with the timber surface. The hole in the wood must be no larger than the bar dowel diameter.
The inner sheet steel element in sheet steel to wood connections should be at least 3 mm thick as the minimum edge distances are determined exclusively from the edge distances in the wooden component from this thickness upwards.
Available work documents:
Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.
CE marking in line with EN 14592
Fastening inner steel to wood or wood to wood connections of e.g. post support brackets, join connections, tie rod connections or joist brackets.
The diameter of bore holes in the wood must correspond to the dowel pin diameter.
The diameter of bore holes in the metal may only be max. 1 mm larger (nominal external diameter) than the dowel pin diameter.
Diameter (Ø) | 20 mm |
Length (L) | 280 mm |
Material | Steel |
Material designation | S235 |
Surface | Zinc plated |
Yield moment | 282.4 Nm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Release tool For connectors with two symmetrically arranged locking lugs
Work coat
Identification rings, PVC
Indexable insert, cermet SCMT (finishing)
Hexagonal cap nuts, high profile DIN 1587, polyamide 6.6, natural
Threaded rod DIN 976, A2-70 stainless steel, shape A
Ducting clamp Part 3 – Double series
W-RD plastic frame anchor Without collar in natural colour. Without approval
Pan head tapping screw, shape C with Z recessed head ISO 7049, steel, zinc-plated, blue passivated, shape C (with tip)
Multi-standard trousers
