Dowel pins
Rod anchor
RODPLG-(A2K)-8X160MM
Register now and access more than 125,000 products
- Chamfered for easier driving-in
- Material: steel S235
- Surface: blue passivated (A2K); ≥ 7 μm
- Application in utilisation classes 1 and 2
Install dowel pin flush with the timber surface. The hole in the wood must be no larger than the bar dowel diameter.
The inner sheet steel element in sheet steel to wood connections should be at least 3 mm thick as the minimum edge distances are determined exclusively from the edge distances in the wooden component from this thickness upwards.
Available work documents:
Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.
CE marking in line with EN 14592
Datasheets(X)
Fastening inner steel to wood or wood to wood connections of e.g. post support brackets, join connections, tie rod connections or joist brackets.
The diameter of bore holes in the wood must correspond to the dowel pin diameter.
The diameter of bore holes in the metal may only be max. 1 mm larger (nominal external diameter) than the dowel pin diameter.
Diameter (Ø) | 8 mm |
Length (L) | 160 mm |
Material | Steel |
Material designation | S235 |
Surface | Zinc plated |
Yield moment | 31.4 Nm |
Last viewed
Sealed grommet TPE
Low-cut safety shoes S2
Twist drill bit, metal Ruko DIN 338 type N HSS-G plain 118°
Rust remover Rost-Off
Amo® III 7.5 type 3 window frame screw Half round head
Twist drill bit HSS DIN 1869 R2 SMART STEP
Group distributor cabinet W-GV 250/S1
Hexagonal nut with clamping piece (all-metal) ISO 7042, A4-70 stainless steel, plain
Locking nut DIN 7967 hot-dip galvanised steel
1-component universal primer