Drainage and protective membrane for structural sealing
Dimpled membrane, single ply
NOTCHPROTBRD-1PLY-2X20M
Register now and access more than 125,000 products
- Components: Dimpled membrane (HD-PE)
- Drains off collecting water and leakage water dependably
- Rot-proof
- Root- and impact-resistant
- Shape-holding
- Resistant to aggressive waters
- Safe for drinking water applications
Datasheets(X)
The drainage and protective membrane is laid loosely over finished waterproofing surfaces. With a bitumen coating the dimpled membrane is to be laid with the dimples to the wall. For other attachments, it serves only as a protective layer and is usually laid with the dimples to the ground.
At joints the membrane is to be overlapped by at least 10 cm. At edges, the membrane is to be guided approx. 15 cm further than the sealing surface and sealed against dirt ingress.
The slope must be at least 2% when laid horizontally. Contact with sharp-edged objects must be avoided.
Length | 20 m |
Area | 40 m² |
Width | 2 m |
Height of dimples | 8 mm |
Min./max. temperature resistance | -30 to 80 °C |
Max. pressing pressure | 200 kN/m² |
Coating weight per m² | 400 g |
Water drainage capacity per m | 2 l/s |
Number of plies | 1 PCS |
Last viewed
Double open-end wrench assortment
SC Speedcut universal end mill, long, optional, triple blade, variable helix DIN 6527L
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with metallic sealing edge, shape B
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
E30 fire protection duct connection collar
Raised countersunk head screw with Z recessed head DIN 966, steel 4.8, plain
W1 double wire clamp