Welcome to Würth Aerospace Solutions For trade customers only

Drainage and protective membrane for structural sealing

Protection and drainage mat
NOTCHPROTBRD-THREE-COAT-2,0X15M

Art.-no. 0993893002
EAN 4050382527639

Prices for customers after login
Drainage and protective membrane for structural sealing

Art.-no. 0993893002

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Triple-layer backfill protection and drainage membrane for protecting horizontal and vertical structures in contact with the ground after sealing has been completed
  • Components: Dimpled membrane (HD-PE), woven filter (PP), sliding film (LD-PE)

  • Average compressive strength

  • Drains off collecting water and leakage water dependably

  • Rot-proof

  • Root- and impact-resistant

  • Shape-holding

  • Resistant to aggressive waters

  • Drinking water safe
Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Instructions

The drainage and protective membrane is laid loosely over finished waterproofing surfaces. The black sliding film faces the structure and the protective fleece is turned against the soil. At joints the membrane is to be overlapped by at least 10 cm. The fleece side is laid over the overlapping membrane. At edges, the membrane is to be guided approx. 15 cm further than the sealing surface and sealed against dirt ingress. The membrane can also be attached at these points. The slope must be at least 2% when laid horizontally. Contact with sharp-edged objects must be avoided.

Length

15 m

Area

37.5 m²

Width

2 m

Height of dimples

8 mm

Min./max. temperature resistance

-30 to 80 °C

Max. pressing pressure

250 kN/m²

Coating weight per m²

800 g

Water drainage capacity per m

3.5 l/s

Number of plies

3 PCS

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information