Drawer partition for system drawers
Separating plate for workshop trolley ULTIMATE
AY-SEPPLT-WRKSHPTRLY-ULTI-8.8-FL
Register now and access more than 125,000 products
- Available in two heights. Suitable for drawer height 68 mm or drawer height 148 mm.
- The partition elements can be easily fixed in place with plastic holders and changed or extended at any time. The partition elements can also be screwed into the pre-punched drawer box base.
- Due to the system dimensions, the partition elements in the drawers can be combined with all the foam and tray inserts as well as boxes from the system world and non-slip mats can be added
- The set consists of two compartment rails including fastening clips
Datasheets(X)
Colour | Silver |
Width x depth x height (external dimension) | 13 x 454 x 65 mm |
Surface | Zinc plated |
Material | Sheet steel |
Suitable for workshop trolley | Ultimate 8.8, Ultimate 12.8 |
Last viewed
Round wire snap ring and snap ring groove DIN 9925, A2 stainless steel, for shafts
ROCKWOOL 800
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Dust-free sanding system foam adapter
Fitting, tapered sealing EN1254, gunmetal, 4340
Perforated profile rail For type H cable clamp
Multi-standard trousers
Multi-function shelf
PVC single core H05/H07V-K, fine wire