Drill hole spray marker
Spray marker for drill hole
DRYMRK-SPRAY-GREEN-DRILLHOLE
Register now and access more than 125,000 products
- Also suitable for applications where the tip of a conventional drill hole marker is too short
- Suitable for drill holes with a depth of up to 50 mm and a diameter of 3-13 mm
- For more than 250 marks
- Can be used at any angle and height
- Clearly visible neon green chalk
- Non-permanent chalk enables any incorrect marks to be easily wiped off
- Can be used with one hand as there is no protective cap
- Safety lock prevents unintentional spraying
Pressurised container: May rupture when heated. Keep out of the reach of children. Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking. Keep away from sunlight and do not expose to temperatures above 50°C. Do not puncture or incinerate, even after use.
Datasheets(X)
Suitable for nearly all surfaces
Line thickness | 4 mm |
Colour | Green |
Material of housing | Aluminium/plastic |
Silicone-free | No |
Last viewed
Sweatband for SR580 Sundström R06-0812
Top bracket latch for insect protection
Push-through guard For pallet shelves
EX SLE 16 LED rechargeable work lamp and emergency power lamp with emergency light function - light switches on automatically in the event of a power failure
Twist drill bit HSCo DIN 340 type RN OXIDE
Lock bracket For glass door locks
Built-in plug socket strip ST1
Holder For long parts
Safety cable knife
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive