Drill set 19 pieces, for steel and aluminium four-link axles

• The different components enable damage-free removal, regardless of the mounting position of the steering gearbox (top/bottom) and no matter which direction the screw sits in the clamping hole.


• Three drilling jigs ensure marking and drilling is exactly central, while the clamping screw quality is no problem for the special HSS TIN or TICN drill.


• No compressing and/or deformation of the clamping screw


• No breakage of the expensive axle body


• Easy to use


• No space problems


• Quick removal

Scope of delivery:

• 1 x drill bit, Ø4.5 mm x L=140 mm


• 1 x drilling jig for thread side, Ø4.5 mm


• 1 x drill bit, Ø7.3 mm x L=110 mm


• 1 x drilling jig for thread side, Ø7.3 mm


• 1 x drill bit, short, Ø4.5 mm x L=80 mm


• 1 x drilling jig for hex head


• 1 x stepped drill bit TICN


• 1 x drive out mandrel for pneumatic chipping hammer


• 1 x press out mandrel for pressing bracket


• 2 x spacer plate 3.6 mm


• 2 x spacer plate 4.0 mm


• 2 x machine nuts M10 with collar


• 4 x stainless steel A2 washers M10